Ferrari 360 oil change




Ferrari 360 oil change

Article Navigation:
  • Photo
  • Understanding Oil Changes - Ferrari Life
  • Video
  • RELATED PAGES
  • The needs the OEM UFI oil filter. It's not I have PAPASPANCAKERIA.TOP oil change procedure. .. But I change oil + oil filter more frequently as I should.

    How many quarts are required for an oil change on a ? I did a search but could not find an exclusive answer Thanks!.

    Oil Change PAPASPANCAKERIA.TOP - Ferrari Read more about filter, prescribed, gearbox, separator, mesh and cartridge.

    Ferrari 360 oil change

    Ferrari 360 oil change

    You also need 12 and 14 mm hex wrenches to remove the drain plugs. I did a search but could not find an exclusive answer Thanks! The filter will have the direction of airflow printed on the side:. Be carefully when you are putting the last quart because you can overfill the system. Stef Read the F Book:

    Ferrari 360 oil change

    Ferrari 360 oil change

    Ferrari 360 oil change

    Ferrari 360 oil change

    Ferrari 360 oil change

    Attention Required! | Cloudflare

    Reply Page 1 of 2 1 2. Understanding Oil Changes. Clean oil is very important to all Ferrari engines and in particular the When cold it runs at very high pressures to ensure full lubrication. This means you need clean oil and oil thin enough to get the necessary films to the necessary moving parts. It's not cheap but critical. Oil filter housings can expand with heat and pressure. The UFI's are built for this. The system holds 12 quarts when dry but you'll never get all of that out and you'll never get all of that in unless the engine is a full tear down.

    And always check final oil level with the engine running and up to full temp. During a change put in about 9 litres and run the car to full temp. Check repeatedly as you gradually add the additional reguired oil. Overfilling is disastrous to these systems. It's best to do on a lift but if not you'll need jack stands for the rear. You'll need to remove the under pan to get at the small tranny filter. Of critical importance is torquing the filter to 25 Nm or about If you value your engine you will purchase this tool.

    Ferrari 360 oil change

    It will pick up any magnetic particles that are in there. They are not cheap either. You also need 12 and 14 mm hex wrenches to remove the drain plugs. These also work on the tranny drain and refill.

    I recommend Redline 5W40 oil. It is fantastic and cures problems. It is fully synthetic oil unlike some other so called "synthetic" oils. Happy to send out to anyone with an e-mail address. Last edited by Gcalo; at Please email me PDF. Guide to the Galaxy: Great suggestion, Rik Here it is. Did not know the system would accept.

    Ferrari 360 oil change

    Attached Images File Type: Originally Posted by Gcalo View Post. No is different I do not have it presently as a single. I'm going to parking to check oil level now! Always good to be knowledgeable and checking another's work never hurts. Pooya, if you're interested about servicing the F, have a look to this chapter of the F book: Even at the min level, you still have 8.

    So there is absolutely no risk of not having enough oil in the engine, even at the min level. My oil level is always half way between the min and max marker. Stef Read the F Book: F More on http: StefVan is online now.

    Originally Posted by gcalo View Post. Good references, Stef I probably put oil change in wrong area! That's why we have to drain engine oil from 2 locations, one drain plug under the engine and the main plug under the gearbox where the oil tank is integrated. On these pictures, you can see very well the oil delivery pipe between the gearbox and the engine to the oil filter As the oil tank is integrated in the gearbox, when the gearbox has to be removed, engine oil must first be drained.

    Ferrari 360 oil change

    Thank you so much Stef and Pooya. I appreciate the lesson here. Could not be any clearer. I have not reach my oil change interval yet, but this is sure info and things to know, prior reaching for the rachet, socket, and so.

    I have not purchase any special tool yet for the job, but I have also hear lots of thing about torque spec. As you mentioned and explained how they are critical. I will keep that in mind as well. Is it more disastrous to start the engine low on oil or start the engine overfilled with oil?

    The Mythical Ferrari Oil Change



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲